Hello folks,

I need to start and think about sorting the engine breathers out. Heres a pic of what ive got i dont know if its right i figured that the two small holes would be equal to the large hole which I have blocked up on the front of the engine. And the lower one in the sump would be an oil drain back from any catch tank. So would i be right in thinking that need a catch tank that has three inlets namely, one from the cam cover and two from the block. Then two outlets, one to vent to atmosphere and one as a return for oil collected back to the sump ( this one being important as i dont want a large catch tank ) ?




Many thanks

Adder

_________________