Got my zetec turbo running, starts and idles perfectly.
When revved it bogs down immediately then picks up and is kind of ok. With every blip of the throttle it bogs down.
background
2.0 zetec Silvertop
T3 turbo
Ofac
Beiges
MSD 195 chip
No amal valve
Have an AFR that reads 11-12 at warm idle
Ive tried :
Checked resistance on CO pot, which is ok. When I unplug invite the car running it runs like sh!t. Plug it back in and it's happy again
Tried a different EDIS module,no difference
If I unplug the map sensor wiring plug it runs like sh!t, plug it back.in again it's ok again.
Unplugging the TPS seems to make no difference at all to idling or revving
If I remove the vac line to the map sensor (creating a massive air leak into the inlet) it revs freely
If I unplug the idle control valve it dues straight away. Plug it back in and it will start again no problem.
Took the plugs out, they are black confirming the car is running rich
Things I've not tried yet
Not checked the fuel pressure, as I dont have gauge (can anyone lend me a gauge)
_________________
One day I'll be an old man and nobody's going to want to hear stories about sensible decisions and wise investments.