Joined: Tue Apr 01, 2008 11:53 pm Posts: 3166 Location: Aberdeen
|
Alot of people try to do rebuilds on the cheap then the engine doesn't last long, even on expensive engines people bodge stuff to save a couple £.
You shouldn't have any movement in the pistons against the bores really as the clearance will be very small. Haynes says a standard cvh is less than 2 thou clearance which is VERY small. I guess an RS turbo would be slightly more than this.
If you have a reciept for the rebuild it might be under warrenty, if it was a DIY job they have maybe just honed the bores with a drill to fit the bigger pistons and not done a very good job.
|
|