Hi all,
I've got a fair sized dent in the front lower panel of my mk2... not to mention it needs considerable welding in the engine bay (usual places) so i figured a removal and replacement is worth while.
I've never removal a car panel in my life, i've cut rust out if the arches and sills a bit before but nothing major. So I wondered if there was a guide or any advise on how to do this?
I've read up the basics of drilling out the existing spot welds, however information on what to do next runs dry. It may seem pretty obvious to most but I would really appreciate some advise, and this goes for refitting the panel too.
Thanks Mark
_________________ http://www.markprzeslawski.blogspot.co.uk
|