mk2fiestachris wrote:
At the time i just ripped them off as replacements weren't too expensive, but now i realize how crap the replacements are i wish i'd tried to save them
. try your best no matter how difficult it is, the crap they stick them to the top of the front panel with was the worst part.
fiestaman1234 wrote:
You could probably separate the wing/front panel slightly with a sharp screwdriver. Then grind with a thin disc (This from the inner wing side) You'll probably have to repair the lip after though. Just take your time as they will easily bend and dent if you're not careful.
Thanks folks, steady away it is, hopefully re-use them.