I had one I fitted to my festival.
And two I'd fitted to my old xr2.
Never got around to fitting either to my current xr2....
Anyway..
Yes. I bought the slimline ones.
Like these..
http://www.s-v-c.co.uk/uploaded/thumbna ... 0xauto.pngDrill two small holes for the screws.. They do come with sticky pads, but they eventually dry up and fall off.
Run the cable down the C pillar to the lights.
I used the included piggy back clips at the time. But knowing how bad those are now, I would have used a piggy back spade terminal instead so no need to mutilate the existing loom and easily removable if needed.
Jason.