pump is on the bigger of the two metal fuel lines on bulkhead other smaller pipe what I thought was the return is banked off. I remember when I put the zetec in I blew down both these pipes . the fatter one made bubbles in the tank
the smaller one no bubbles so took the fat pipe as my feed and blanked other off.
fuel pipe I used was 8mm. pump was mounted where metal fuel pipes ended so about halfway up bulkhead .
as for flow and pressure im not sure . I do have a one way fuel valve just befor carbs . to stop the pump having to prime fuel lines and filter every time I turn it off . its giving me the hump
looked like a right tool in front of a clio 172 yesterday . pulled up to lights, young lad revs the 172 so I think to myself right kid your on . left the lad standing at the lights .
id got to third gear grabbed for fourth ,loads of popping and banging on overrun.
then car dies . spotty little toad in the 172 gives me the finger and F"s off .
cant wait for that rematch .....