Joined: Tue Sep 13, 2011 6:47 pm Posts: 92 Location: The borders
|
I installed a blacktop into my xr2 a few months back and has been running fine but at the time of the install I used a silicone t piece to create the bottom rad hose to go onto the xr2i cvh radiator that I had. At the time it never looked right (the water pump is not straight with the rad outlet pipe) and it appears to weep a little at the joints - I just wondered what bottom hoses and radiators other blacktop owners use?
Also the cam cover breather originally fed into the air filter box but my car has a cone filter (again because it's what I had) so the breather is simply on a hose to atmosphere via a small air filter - is there are way of fitting that better into the engine? I don't want a catch tank, or should I source a ford air box and pipe it into that?
Cheers in advance Luke
|
|